Building Wood Products
Sharp Plywood distributes the following to cabinet makers, joiners, shop fitters:
Particleboard - Standard, HMR and Melamine Faced
Particleboard is available in many sizes and thicknesses from 9mm to 33mm.The comprehensive range allows economic cutting of boards. Its fine, uniform surface makes it an ideal substrate for laminating, decorative foils and veneering. It is available in two grades, standard and MR (moisture resistant). Particleboard is easy to work with normal woodworking tools as it has no grain direction so there is the same strength and appearance in all directions. This reduces waste. The fine surface layers are also pre sanded, ready for painting or laminating.
White Particleboard surfaced with a white melamine bonded to both sides. It is available in two grades, standard and MR (moisture resistant) substrates, making it ideal for Cabinetry. White Particleboard is available in many sizes and thicknesses from 12mm to 33mm. The comprehensive range allows economic cutting of boards. White Particleboard is easy to work with normal woodworking tools as it has no grain direction so there is the same strength and appearance in all directions. This reduces waste.
Paricleboard Flooring (Structafloor)
Particleboard Flooring provides an ideal sub floor for a range of floor coverings including vinyl, ceramic tiles, quarry, slate, parquet and carpet. Particleboard Flooring is made from precision milled wood flakes and bonded with moisture resistant synthetic resin. For additional protection during construction and exposure to weather, the upper surface is resin enriched and all edges are wax sealed. However it is advisable to enclose the building as soon as possible after laying the floor. (MSDS Available and Installation Manual.
MDF (Medium Density Fibreboard) - Standard, MR, E-Zero MR, Melamine Faced
Medium Density Fibreboards (MDF) is versatile and easy-to-use panel product. This makes it ideal for use in all cabinet-making, shop fitting, furniture and building industries. MDF is extremely easy to machine, it cuts, drills and routs cleanly without splintering or chipping when compared to timber or other types of wood panel products. It has a sanded finish ideally suited for painting or can be overlayed with Timber Veneer, Melamine. MDF is available as STD for general use and MR (moisture resistant) for use in high humidity areas. (MSDS Available).
Plywood - Veneered, Panelwood (VJ), Texturewood (Cladding), Blockboard, Bending, Imported, Polyester
Plywood is a strong utility and decorative product made from thin veneers known as plies. Plywood has a wide range of uses ranging from structural applications through to decorative and marine applications. It has a high impact resistance and has superior bending, torsion and compression strengths. More facts about plywood here.....
Plywood Veneer Faces
A-FACE - high quality appearance grade suitable for clear finishing.
B-FACE - suitable for high quality paint finishes.
C-FACE - non-appearance grade with a sanded surface.
D-FACE - non-appearance grade with open defects.
- A-BOND - Type A bond, is produced from a phenol formaldehyde (PF) resin, which sets permanently under controlled heat and pressure. It forms a permanent bond that will not deteriorate under wet conditions, heat or cold. It is readily recognisable by its black colour.
- B-BOND - Type B bond is produced from melamine fortified urea formaldehyde resin (MUF) which sets under controlled heat and pressure. Type B bond is included in the exterior plywood standard and is suitable for semi exposed applications such as exterior door skins.
These face qualities and bond types determine the grade of plywood. These grades include:
- Hoop Pine Marine Ply - A-Faces, A-Bond
- Gaboon Marine Ply - AFaces, ABond
- A-C Exterior Ply - A-Face, C-Back, A-Bond
- B-B Hoop Pine Ply - B-Faces, A-Bond
- C-C Structural F14 - C-Faces, A-Bond
- C-D Structural F14 - C-Face, D-Face, A-Bond
- C-D Plyflooring F14 - Tongue And Groove A-Bond
- Formply- Phenolic Film Faced, A-Bond
- Bendy Ply - Rough Sawn, A-Bond
One of the most versatile and easy to use medium density fibreboards available in Australia today. Ideal for a number of interior applications in the cabinet making, shop fitting, furniture and building industries. CUSTOMwood's reliable quality guarantees uniformity in size, colour, density and strength. This product is ideal for applications where the project requires the sheet to be machined or painted. Free of knots and grain amkes it the ideal substrate for the application of natural timber veneers, vinyl, paper and heat transfer foils. Manufactured from managed and renewable platation pine and is E0.
Also available surfaced with a white melamine impregnated decorative paper making it a versatile panel for interior use in furniture and joinery applications, particularly in cupboards, wardrobes and storage applications. Sheets are available in both single and double sided white. (Brochure available)
Call and order your CUSTOMwood today.
Is particleboard manufactured from managed and renewable platation pine and comes in a range of thicknesses and sheet sizes. Fine with a uniform surface makes it an ideal substrate for laminating or veneering and is great for building panels, benches, shelves and partitions. (Brochures available)
Easy to work with, comes with no grain direction therefore is the same strength and appearance in all directions. The surface layer is also pre-sanded making it ready for painting and laminating. Available in two grades, standard and moisture resistant, making in ideal for cabinetry. (MSDS available)
Available with a white decorative paper and two finishes - Velvet - a delicate eggshell surface & Decor - a lightly dimpled texture.
To place your order or to find out more about any of the above contact us today!